A man grows into a giant such that his linear dimensions increase by a factor of $9.$Assuming that his density remains same, the stress in the leg well change by a factor of:
A. $\dfrac{1}{{81}}$
B. $9$
C. $\dfrac{1}{9}$
D. $81$
Answer
653.4k+ views
Hint:Here,we are going to apply the concept of stress and it is defined as the force applied per unit area.If the area is high then stress become less and when is low then stress will be maximum provided that force applied on it remains constant.
Complete step by step answer:
We know that stress is defined as the ratio of force applied to the area of cross-section. Consider the height and width of the man as a linear dimension as \[l\] and \[b\].
Then, initial stress$ = s = \dfrac{F}{{l \times b}}$ . . . (1)
Now, the dimensions increase by the factor of $9$ i.e. ${l^1} = 9l$ and ${b^1} = 9b$
Hence, now stress ${s^1} = \dfrac{{{F^1}}}{{{l^1} \times {L^1}}}$
$ \Rightarrow {s^1} = \dfrac{{{F^1}}}{{9l \times 9b}}$
$ \Rightarrow {s^1} = \dfrac{{{F^1}}}{{81lb}}$ . . . (2)
Dividing equation (2) by equation (1) we get
$\dfrac{{{S^1}}}{S} = \dfrac{{\dfrac{{{F^1}}}{{81lb}}}}{{\dfrac{F}{{lb}}}}$
$ = \dfrac{{{F^1}}}{{81lb}} \times \dfrac{{lb}}{F}$
$ \Rightarrow \dfrac{{{S^1}}}{S} = \dfrac{{{F^1}}}{{81lb}}$ . . . (3)
Now, $F = ma = mg.$
Since, the force 1) due to the acceleration due to gravity we know that, volume density is mass per unit volume.
i.e. $e = \dfrac{m}{V}$
$ \Rightarrow m = eV$
$ \Rightarrow F = eVg$
Now, since linear dimensions have changed by a factor of $9$ volume would change by a factor of ${9^3}.$
$\therefore {F^1} = eVg \times {9^3}.$
Putting these volumes is equation (3), we get
$\dfrac{{{S^1}}}{S} = \dfrac{{eVg \times {9^1}}}{{81 \times eVg}}$
$ \Rightarrow \dfrac{{{S^1}}}{S} = 9(\therefore 81 = {9^2})$
$ \Rightarrow {S^1} = 95$
Therefore, the above explanation, the correct option is (B) 9.
Note:We could solve this question just by observing the options. Clearly, finding the size of mass is increasing, the stress is his leg must increase. Therefore, (A) and (C) cannot be the options.
Since, all the dimensions are increasing equally, by the factor of $9$ and density is the same. Then, stress should also increase by the factor of $9.$ Therefore, option (B) should be the answer.
Complete step by step answer:
We know that stress is defined as the ratio of force applied to the area of cross-section. Consider the height and width of the man as a linear dimension as \[l\] and \[b\].
Then, initial stress$ = s = \dfrac{F}{{l \times b}}$ . . . (1)
Now, the dimensions increase by the factor of $9$ i.e. ${l^1} = 9l$ and ${b^1} = 9b$
Hence, now stress ${s^1} = \dfrac{{{F^1}}}{{{l^1} \times {L^1}}}$
$ \Rightarrow {s^1} = \dfrac{{{F^1}}}{{9l \times 9b}}$
$ \Rightarrow {s^1} = \dfrac{{{F^1}}}{{81lb}}$ . . . (2)
Dividing equation (2) by equation (1) we get
$\dfrac{{{S^1}}}{S} = \dfrac{{\dfrac{{{F^1}}}{{81lb}}}}{{\dfrac{F}{{lb}}}}$
$ = \dfrac{{{F^1}}}{{81lb}} \times \dfrac{{lb}}{F}$
$ \Rightarrow \dfrac{{{S^1}}}{S} = \dfrac{{{F^1}}}{{81lb}}$ . . . (3)
Now, $F = ma = mg.$
Since, the force 1) due to the acceleration due to gravity we know that, volume density is mass per unit volume.
i.e. $e = \dfrac{m}{V}$
$ \Rightarrow m = eV$
$ \Rightarrow F = eVg$
Now, since linear dimensions have changed by a factor of $9$ volume would change by a factor of ${9^3}.$
$\therefore {F^1} = eVg \times {9^3}.$
Putting these volumes is equation (3), we get
$\dfrac{{{S^1}}}{S} = \dfrac{{eVg \times {9^1}}}{{81 \times eVg}}$
$ \Rightarrow \dfrac{{{S^1}}}{S} = 9(\therefore 81 = {9^2})$
$ \Rightarrow {S^1} = 95$
Therefore, the above explanation, the correct option is (B) 9.
Note:We could solve this question just by observing the options. Clearly, finding the size of mass is increasing, the stress is his leg must increase. Therefore, (A) and (C) cannot be the options.
Since, all the dimensions are increasing equally, by the factor of $9$ and density is the same. Then, stress should also increase by the factor of $9.$ Therefore, option (B) should be the answer.
Recently Updated Pages
Write structures of the following compounds i 2 Chloro3methylpentane class 11 chemistry CBSE

What is BLO What is the full form of BLO class 8 social science CBSE

Explain the Treaty of Vienna of 1815 class 10 social science CBSE

A Paragraph on Pollution in about 100-150 Words

XIX+XXX A 49 B 51 C 55 D 44 class 5 maths CBSE

If x a + bt + ct2 where x is in meters and t is in class 11 physics CBSE

Trending doubts
One Metric ton is equal to kg A 10000 B 1000 C 100 class 11 physics CBSE

Find the value of the expression given below sin 30circ class 11 maths CBSE

What do you mean by retardation What is its SI uni class 11 physics CBSE

Draw a diagram of nephron and explain its structur class 11 biology CBSE

10 examples of friction in our daily life

Difference between physical and chemical change class 11 chemistry CBSE

